Cisco RSP720-3C-10GE

Cisco RSP720-3C-10GE Cisco 7600 Series RSP720-10GE with PFC-3C includes:
- Two X2-based 10 GE ports
- Two GE SFP ports and one 10/100/1000 gigabit port for additional flexibility
- Integrated 720-Gbps switch fabric
- PFC-3C and Multilayer Switch Feature Card (MSFC4)
- Route processor: 1- to 4-GB DRAM (1-GB default)
- Service processor: 1- to 2-GB DRAM (1-GB default)
- One external Compact Flash Type II slot
- 4-MB nonvolatile RAM (NVRAM)
- 512-MB internal boot memory (Compact Flash)

Supported chassis and line cards:

Cisco 7603-S, 7604, 7606-S, 7609, 7609-S, and 7613* models

* The Cisco 7613 is only supported from Software Release 12.2(33)SRE2 onwards. The RSP720-10GE will not support 7613 chassis with earlier IOS release.

The Cisco 7606 is not supported in any version with the RSP720-10GE

All of the Ethernet Services Plus modules (Cisco 7600 Series ES+) are supported

SIPs and SPAs:

? Cisco 7600 Series SPA Interface Processor-600 (Cisco 7600 SIP 600)
? Cisco 7600 Series SPA Interface Processor-400 (Cisco 7600 SIP 400)
? Cisco 7600 Series SPA Interface Processor-200 (Cisco 7600 SIP 200)
Cisco 7600 Series/Catalyst® 6500 Series Enhanced FlexWAN Module

All of the Cisco 7600 Series Ethernet services modules are supported

High-density Ethernet cards (part numbers):

• WS-X67xx (WS-X6704-10GE and WS-X6708-10GE are both supported)
• WS-X65xx
• WS-X64xx
• WS-X61xx
Distributed forwarding cards (part numbers)*:

• DFC3C
• DFC3CXL
• DFC3B
• DFC3BXL
** Note that the rule of the least common denominator applies in a Cisco 7600 Series chassis and the lowest level of PFC or DFC dictates at which level the entire chassis operates. A DFC3B forces the Cisco 7600 Series configuration to run in 3B mode, regardless of the PFC-3C (or -3CXL) of the RSP720-10GE.