NW Remarketing Inc. is not, and does not claim to be, an authorized Distributor/Reseller of any manufacturer mentioned on this page.

JQP-04SRAB1

JQP-04SRAB1
JQP-04SRAB1 JQP-04SRAB1 JQP-04SRAB1 JQP-04SRAB1
Brand: JDSU
Product Code: JQP-04SRAB1
Availability: 28
Condition: Unused/Sealed
Condition: Unused/Sealed
Price: $105.00
Qty:  
Description Reviews (0)
JDSU JQP-04SRAB1 QSFP+ 4 x 10GBase-SR compatible , 850 nm, commercial temperature range, 100 m optical transceiver, bail latch (These units come in a 25 pack NEW/Sealed, if you order less than 25 they will be taken out of the clamshell but still be new.)

Key Features
• Supports 40 Gigabit Ethernet and 4 x 10G Base-SR compatible fanout applications
• Integrated transmitter and receiver
• MPO optical receptacle
• RoHS 6/6 compliant
• Operating case temperature range from -5 to 70°C
• Low power consumption (<1.5 W max)
• Hot-pluggable to 38-pin electrical interface
• 2-wire management interface


The JDSU 40 G QSFP+ Optical Transceiver is a parallel photonic-integrated fiber optic transceiver that provides a high-speed link at a signaling rate of 41.25 Gbps over 100 m of OM3 multimode optical fiber. The module complies with the QSFP+ MSA SFF-8436 and with IEEE802.3-2012 Clause 86 and Annex 86A.
The transceiver integrates the receive and transmit path on one module. In the transmit side, four 10.3125 Gbps serial data streams are passed to an array of four laser drivers. The laser driver array controls an array of four vertical cavity surface emitting lasers (VCSELs) at a wavelength of 850 nm; the optical output of the VCSELs enable data transmission over a multimode ribbon-fiber array through an industry-standard MPO connector. In the receive side, the four 10.3125 Gbps optical data streams from the MPO connector are recovered through an array of four PIN photodetectors and then passed to an array of four transimpedance amplifiers, and passed out to the 38-way edge connector. This module has an option to operate with four independent 10 G transceivers through a MPO-toLC break out cable. This module features a hot-pluggable electrical interface, low power consumption, and a 2-wire management interface

JQP-04SRAB1
Data Rate: 40Gb/s
Form Factor: QSFP+
Wavelength nm: 850
Connector Type: MPO
Pin Array: 4x10
Distance: 100m
Latch Type Push/pull tab
Temp Range C: -5 to 70


0
There are no reviews for this product.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Tags: JQP-04SRAB1, JDSU JQP-04SRAB1, JQP04SRAB1, JDSU, JDSU, JQP-04SRAB1, QSFP+, 4, x, 10GBase-SR, compatible, , , 850, nm, , commercial, temperature, range, , 100, m, optical, transceiver, , bail, latch, (These, units, come, in, a, 25, pack, NEW/Sealed, , if, you, order, less, than, 25, they, will, be, taken, out, of, the, clamshell, but, still, be, new.), Key, Features, , Supports, 40, Gigabit, Ethernet, and, 4, x, 10G, Base-SR, compatible, fanout, applications •, Integrated, transmitter, and, receiver •, MPO, optical, receptacle •, RoHS, 6/6, compliant •, Operating, case, temperature, range, from, -5, to, 70°C •, Low, power, consumption, (<1.5, W, max) •, Hot-pluggable, to, 38-pin, electrical, interface •, 2-wire, management, interface The, JDSU, 40, G, QSFP+, Optical, Transceiver, is, a, parallel, photonic-integrated, fiber, optic, transceiver, that, provides, a, high-speed, link, at, a, signaling, rate, of, 41.25, Gbps, over, 100, m, of, OM3, multimode, optical, fiber., The, module, complies, with, the, QSFP+, MSA, SFF-8436, and, with, IEEE802.3-2012, Clause, 86, and, Annex, 86A. The, transceiver, integrates, the, receive, and, transmit, path, on, one, module., In, the, transmit, side, , four, 10.3125, Gbps, serial, data, streams, are, passed, to, an, array, of, four, laser, drivers., The, laser, driver, array, controls, an, array, of, four, vertical, cavity, surface, emitting, lasers, (VCSELs), at, a, wavelength, of, 850, nm;, the, optical, output, of, the, VCSELs, enable, data, transmission, over, a, multimode, ribbon-fiber, array, through, an, industry-standard, MPO, connector., In, the, receive, side, , the, four, 10.3125, Gbps, optical, data, streams, from, the, MPO, connector, are, recovered, through, an, array, of, four, PIN, photodetectors, and, then, passed, to, an, array, of, four, transimpedance, amplifiers, , and, passed, out, to, the, 38-way, edge, connector., This, module, has, an, option, to, operate, with, four, independent, 10, G, transceivers, through, a, MPO-toLC, break, out, cable., This, module, features, a, hot-pluggable, electrical, interface, , low, power, consumption, , and, a, 2-wire, management, interface JQP-04SRAB1 Data, Rate-, 40Gb/s Form, Factor-, QSFP+ Wavelength, nm-, 850 Connector, Type-, MPO Pin, Array-, 4x10 Distance-, 100m Latch, Type, Push/pull, tab Temp, Range, C-, -5, to, 70